How do I add/delete a user code on my 275 Contemporary Deadbolt?
How to add an User CodesA total of 30 User Codes may be programmed. Do not program a User Code that is the same as your Programming Code.
CAUTION: A User Code is used to unlock the door while a Programming Code is a password for making changes to the lock features.
1. Make sure the lock is unlocked and the door is open.
2. Enter your Programming Code - for new installation, default is 0-0-0-0.
3. Press enter arrow. You will hear one beep.
4. Press 1.
5. Press enter arrow. You will hear one beep.
6. Enter a new User Code. It must be 4-10 digits.
7. Press enter arror. You will hear two beeps if successful. If you hear three beeps, it was unsuccessful. Repeat from step 1 slowly.
8. Test the code: While your door is open, lock it. Wake the screen and touch the random lit digits.Enter your new User Code, then press the Lock symbol. The door should unlock.
How to delete an User Code
The lock is pre-programmed with a default User Code of 1-2-3-4. It is recommended that you delete this code.
1. Make sure the lock is unlocked and the door is open.
2. Enter your existing Programming Code.
3. Press enter arrow. You will hear one beep.
4. Press 2.
5. Press enter arrow. You will hear one beep.
6. Enter the User Code you wish to delete.
7. Press enter arrow. You will hear two beeps if successful. If you hear three beeps, it was unsuccessful. Repeat from step 1 slowly.
8. Test the code: While your door is open, lock it. Enter the User Code, then press the Lock symbol. The door should not unlock.